Quick Start - Motorola FastForward V60 Series User Manual

Quick Start

1. Plug the power supply into the back of FastForward and insert
into an electrical outlet. WARNING: Do not plug the FastForward
power connector directly into your handset. This could potentially
damage your handset.
2. Place the device on a convenient flat surface with good
wireless coverage.
3. Create a new phone book entry in your mobile phone with the
name "Cf1" see page 7 for complete instructions.
4. In the Cf1 entry location, store the phone number for the location
to which you would like incoming mobile calls forwarded.
– If you are setting up at home, use your home number or
a distinctive ring number. (In order for distinctive ring feature
to properly work, the distinctive ring number must be
programmed into your phone book as the phone number
you would like to forward to.)
5. Place the Cf Selector Switch, located on the bottom of the
device, into the Cf1 position.
6. The phone must be turned on for call forwarding to work.
That's it! Your FastForward is now ready for use.
2
To Start Call Forwarding:
- Simply insert your phone into the FastForward device.
- The Forward indicator on the device will illuminate after several
seconds – your incoming wireless calls are now forwarded.
NOTE: Any unanswered FastForward call will be treated as a normal landline
call is treated today.
To Cancel Call Forwarding:
- Press the Cancel button on the front of the FastForward device.
- The Forward indicator will extinguish after several seconds.
- You may now remove your mobile phone. (In order for the
FastForward device to work properly, the handset should be
turned on and not engaged with an active call when placed
on the FastForward device or while canceling call forward.)
3