Ready
indicator
(green)
Rapid blinking alter-
nately
Off
Off
Indicator Messages
Error
Condition
indicator
(orange)
The tray ran out of paper
while printing.
No media in the tray
specified in the printer
driver.
Media size error
If the "Auto Continue"
has been activated in the
Status Display, the sheet
already fed in, is auto-
matically ejected after a
predetermined time.
Waiting to print the back
of the paper during man-
ual duplex printing
Blinking
Media empty
Media jam
The drum cartridge or
toner cartridge is not
installed.
On
Front cover or top cover
is open.
Action
Load media into
Tray 1.
Load the appropriate
type of media into
Tray 1.
Load the appropriate
size media into Tray 1.
Insert the paper so
that the back can be
printed, and then
press the Cancel key
(less than 5 seconds).
For details, refer to
"Manual Duplexing"
on page 37.
Load media into Tray
1.
Clear the jam, close
the covers, and then
continue with the print
job.
Install the drum car-
tridge and all toner
cartridges.
Close the front cover
and top cover.
63