Controls And Functions - Yamaha YHT-S401 Owner's Manual

Controls and functions

■ Front panel of the subwoofer integrated receiver
1
2
3
4
5
1 STATUS indicator
Lights up to show the system condition. (☞ P. 10)
2
(Power)
Turns on the unit, or sets it to standby mode.
(☞ P. 10)
Note
A small amount of electricity is consumed to receive the
infrared signal from the remote control even when the unit is
in standby mode.
3 INPUT
Selects an input source you want to listen to.
(☞ P. 10)
■ Rear panel of the subwoofer integrated receiver
1 Power Cable
For connecting an AC wall outlet. (☞ P. 8)
2 HDMI IN 1 - 3/HDMI OUT (ARC) jack
• HDMI IN 1 - 3 for connecting HDMI
compatible external components. (☞ P. 9)
• HDMI OUT for connecting an HDMI compatible
TV. (☞ P. 9)
3 DIGITAL IN (TV) jack
For connecting optical digital cable to the TV.
(☞ P. 9)
6 7
4 USB port
5 VOLUME –/+
6 PHONES jack
7 Remote control sensor
8 Front panel display
7
1
4 DIGITAL IN (STB) jack
5 ANALOG INPUT jack
6 ANTENNA terminal
7 SPEAKERS terminal
8
For connecting a USB device. (☞ P. 16)
Controls the volume of the unit. (☞ P. 10)
For connecting headphones. (☞ P. 10)
Receives infrared signals from the remote control.
(☞ P. 2, 5)
Shows information about the operational status of the
unit. (☞ P. 4)
6 5 4 3
2
For connecting digital audio pin cable to the STB.
(☞ P. 9)
For connecting analog audio cable to external
components. (☞ P. 9)
For connecting supplied FM antenna. (☞ P. 9)
For connecting speakers. (☞ P. 8)
Getting started
3
En