Yamaha YHT-S401 Owner's Manual page 11

Connecting a TV and BD player
Follow the steps below for cable connection according to the components you use.
1
HDMI cable (sold separately)
3
Optical cable (sold separately)*
4
1
Game console
y
*1
For HDMI control function, an optical cable is not required if the TV's "ARC" terminal is used "2". Audio return channel (ARC) carries
digital audio signal (from the TV) to this unit via an HDMI cable. Activate the HDMI control function of this unit to enable ARC
function. (☞ P. 19)
y
*2
Connect analog pin cables (sold separately) to the analog audio output jacks of an external device, such as a VTR, to play back analog
audio sound.
y
*3
Connect a digital audio pin cable (sold separately) to the coaxial digital output jack of a satellite/cable TV tuner to play back digital
sound.
1
2 3
* *
1
BD player
2
HDMI cable (sold separately)
4
Indoor FM antenna (supplied)
y
If the radio wave reception is weak in your area or you want to
improve the radio wave reception, we recommend that you use an
outdoor antenna. For details, consult your nearest authorized
Yamaha dealer or Service Center.
1 Remove the cap
3
1
*
2
Connection
2 Check the
direction of the
plug
HDMI INPUT
(Example)
TV
Video signals
Audio signals
9
En