Recording And Capturing Pictures Manually; Operating Ptz Control; Ptz Control Panel - HIKVISION DS-2CD20 Series User Manual

/
/
/
/

5.3 Recording and Capturing Pictures Manually

In the live view interface, click
click to record the live view. The saving paths of the captured pictures and clips
can be set on the Configuration > Local Configuration page. To configure remote
scheduled recording, please refer to Section 7.2.
Note: The captured image will be saved as JPEG file or BMP file in your computer.

5.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the PTZ
parameters on RS-485 settings page referring to Section 10.8 RS-485 Settings.

5.4.1 PTZ Control Panel

On the live view page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
User Manual of Network Camera
Live view with the third stream.
Click to select the third-party plug-in.
Manually capture the picture.
Manually start/stop recording.
Audio on and adjust volume /Mute.
Turn on/off microphone.
Turn on/off 3D zooming function.
on the toolbar to capture the live pictures or
to show the PTZ control panel or click
30
to