Configuring Video Tampering Alarm - HIKVISION DS-2CD20 Series User Manual

(3) Select the start time and the end time for the switch timing.
(4) Select the area by clicking the area No.
(5) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area in the daytime.
(6) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area at night.
(7) Set the arming schedule and linkage method as in the normal configuration mode.
(8) Click Save to save the settings.

6.6.2 Configuring Video Tampering Alarm

Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1. Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering
User Manual of Network Camera
Figure 6-45 Day/Night Scheduled-Switch
75