Advertisement
D40-1132-05
1.3. \CASSETTE CASE/]CASE LIFTER
Disassembling
(a) Set the mechanism in EJECT POSITION.
(b) Remove D2x3 CAMERA SCREW.
(c) Push ]CASE LIFTER in arrow direction so that "E" and
"F" portions are disengaged.
Reassembling
(a) Confirm that the mechanism is at EJECT position.
(b) Meeting the holes in ]CASE LIFTER with the holes in
\CASSETTE CASE as shown in figure, assemble these
parts.
(c) Meeting A, B, C with A', B', C' respectively, insert the
Cassette Case obliquely. (Note that "D" portion may get
stuck.)
(d) When the Cassette Case becomes horizontal, confirm that A, B, C are engaged, then adjust fitting at E and F portions in
Fig.(c) in previous item, and insert the Case completely. (Step (c) in previous item) (Fitting is over when no gap is found.)
(e) Tighten 2x3 SCREW.
4
DISASSEMBLY FOR REPAIR
Advertisement
