Download Print this page

Kenwood DPX-5010 Service Manual page 46

Cd cassette dsp receiver
Hide thumbs Also See for DPX-5010:

Advertisement

1.10. &OP PLATE Ass'y
Disassembling
D
(a) Remove
CAMERA TAPPING SCREW.
&
(b) Remove
O.P PLATE HOLDER.
(c) Slide the O.P PLATE HOLDER in arrow direction todis-
engage from the pin A and take it out.
Reassembling
(a) Align studs B, C, and D on
@
pin E of
HEAD PANEL Ass'y.
_
(b) Adjust
EJECT LEVER position to the corner of hole in
the Chassis as shown in figure.
&
(c) Mount
O.P PLATE Ass'y so that the boss F of
PLATE enters a slot of O.P PLATE Ass'y. (At this time,
the O.P PLATE Ass'y will be oblique because it rides on
the EJECT LEVER.)
(d) Under this condition move the part of OP PLATE Ass'y in
arrow direction, and the OP PLATE Ass'y will be locked
by the EJECT LEVER. (If not locked, with this part held
in arrow direction, move the OP PLATE to the front and
rear.)
(e) Moving the OP PLATE to the front and rear, confirm that
the EJECT LEVER is engaged and disengaged.
DISASSEMBLY FOR REPAIR
1
CHASSIS Ass'y Ass'y with
FR
D40-1132-05
9

Advertisement

loading