Advertisement
D40-1132-05
CONTENTS / DISASSEMBLY FOR REPAIR
CONTENTS
CONTENTS / DISASSEMBLY FOR REPAIR.............2
MECHANISM DESCRIPTION ..................................13
ADJUSTMENT..........................................................19
DISASSEMBLY FOR REPAIR
1.1. GUIDE BRACKET
CAUTION:
This part is damageable during disassembling, and it cannot
be reused.
Disassembling
(a) Note that 0GUIDE BRACKET is locked at three places
shown in figure.
(b) Set the mechanism in "R.PLAY" mode (see 2.1 Manual
Operation).
(c) Push "B" portion strongly upward with a proper tool, and
the Bracket will be unlocked at once.
If the above unlocking failed, break the lock with nippers
(In such a case, take care not to allow debris to enter the
deck.)
Reassembling
(a) From the side of PINCH ROLLER ARM Ass'y, first insert
"D" portion into a hole in 1CHASSIS Ass'y.
(b) Adjusting three locks and "E" portion, push the Bracket
down until it clicks.
(c) Make sure that the Bracket is locked at three places.
(hooks are engaged with the Chassis.)
2
EXPLODED VIEW ....................................................20
PARTS LIST .............................................................21
Advertisement
