Download Print this page

Kenwood DPX-5010 Service Manual page 51

Cd cassette dsp receiver
Hide thumbs Also See for DPX-5010:

Advertisement

D40-1132-05
2.2. OPERATIONAL DESCRIPTION
2.2.1 PACK IN
PLAY
Pulling in a cassette tape
(a) lnsert a cassette tape in the arrow direction as shown in Fig.1.
(b) The Pack Slider is pushed, and the *EJECT LEVER Ass'y is
moved via the PS |ACTUATOR PLATE as shown in Fig.2.
(c) The *EJECT LEVER is pushed and the EJECT SW is turned OFF.
(d) The microprocessor detects this and drives the CM2 SUB-MOTOR Ass'y.
(e) The SUB-MOTOR Ass'y rotates CW, and a driving force is transmitted via 567B/C/D GEAR to move the &OP PLATE Ass'y.
(f) At this time, the OP PLATE Ass'y has been locked by the
EJECT LEVER Ass'y and therefore the EJECT LEVER rmoves,
too. (Fig.3)
(g)The EJECT LEVER Ass'y moves the |PS ACTUATOR and 'PACK SLIDER (reverse motion of (b) to pull in a cassette tape.
(h)At the same time, a bent part of \CASSETTE CASE inserted in
a slot of EJECT LEVER Ass'y shown in Fig.4 slides along the
slot, so that the CASSEITE CASE lowers.
14
MECHANISM DESCRIPTION
Fig.1
Fig.2

Advertisement

loading