Using The Self-Timer - Konica Minolta DiMAGE E500 Instruction Manual

Using the Self-Timer

The self-timer can be used in situations such as group shots. When using this option, you should either
mount the camera on a tripod (recommended) or rest it on a flat, level surface.
1. Secure the camera to a tripod or place it on a stable surface.
2. Rotate the mode dial to
3. Press the ON/OFF button to turn on the power.
4. Toggle until your desired self-timer mode appears on the
LCD monitor.
[ No Indication]
5. Compose your scene and press the shutter button.
The self-timer function is activated.
The photography is then taken after the preset time.
To cancel the self-timer at any time, press the shutter or ON/
OFF button, switch the mode dial to another mode or press
to disrupt the sequence.
After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
The Burst and AEB features will be disabled in the self-timer (10+2) mode.
If the remaining number of shots is 1, the self-timer (10+2) mode will be disabled.
If the self-timer (10+2) is selected, the flash mode is automatically set to flash off.
, P , , , or
10+2
.
EN-27