Connecting Wires To Terminals - Kenwood KCA-SR50 Instruction Manual

Connecting Wires to Terminals

Control unit
SIRIUS connection wire
(Accessory1)
(Front side)
(Rear side)
¤
• Do not connect any unit other than the
SIRIUS tuner. A failure could result.
If you want to connect KCA-S220A
Control unit
⁄
• Connect the KCA-SR50 to the terminal labelled TO CHANGER 2.
¤
• Please keep the total extension of the control cable from the control unit to the disc changer to 13 m or less. Control cable
lengths in excess of 13 m will cease to function properly.
8
|
English
To Kenwood disc changer/ SIRIUS
control input
KCA-SR50
SIRIUS Universal
Tuner or Portable
Tuner
KCA-S220A
TO TO TO
H/U CHANGER 1 CHANGER 2
⁄
• When using with the KCA-BT100 or
KTC-HR100TR, connect to it.
KCA-SR50
TO
HEAD UNIT
Disc changer