• Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. To prevent a short circuit, never put or leave any • Make sure to ground the unit to a negative metallic objects (such as coins or metal tools) 12V DC power supply.
If the unit fails to operate properly, press the Remove the backing from the hook and loop fastener (Accessory 2) and attach it to the Reset button. bottom of the unit. Install the Smartphone Adapter unit on the carpet. • The firmware of the Smartphone Adapter unit may be updated.
Smartphone (commercially available) GPS antenna (CX-G100 : Optional Accessory) Main unit Navi I/F Input SMARTPHONE ADAPTER (KCA-ML100) Main unit wire harness ⁄ Connect to the vehicle's parking brake detection switch harness. Accessory 1 Light Green (Parking sensor wire) Blue/White (Power control wire)
: CDC NCM Subclass (MirrorLink Kanagawa, 221-0022, Japan supported smartphone) EU Representative’s: General Kenwood Electronics Europe BV Operating Voltage Amsterdamseweg 37, 1422 AC UITHOORN, : 14.4 V (10.5 – 16 V allowable) The Netherlands Dimensions (W × H × D) 164 mm ×...