Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KCA-SR50 Serial number...
NOTE • If you experience problems during installation, To prevent injury or fire, take the following consult your Kenwood dealer. precautions: • If the unit does not seem to be working right, try • To prevent a short circuit, never put or leave any pressing the reset button on the control unit first.
Notes Connectable Models NOTE When initially activating your subscription, if you have changed your subscription, or if SIRIUS itself has updated streaming broadcast service, automatic 2007 models reselection of reception operates by following the *KDC-X991, *KDC-X891, *KDC-X791, *KDC-MP735U, current channel setting. *KDC-MP635 At this time, audio reception may be momentarily interrupted.
Operations ı Press the [FM] button. How to read Each time the button is pressed, the preset band The operation method differs depending on the switches between the SR1, SR2, SR3 and SR4. model of the control unit. For the model with a Control knob, perform the operation steps marked with Å.
Operations Channel Scan Switching Display Every receivable channel is checked for 10 seconds. When you are listening to the Sirius satellite radio, you can switch over the display information as Start Channel Scan follows. Press the [AUTO] button for at least 2 seconds. For operations, see the <Switching Display>...
..4 • If your car is not prepared for this special connection- system, consult your Kenwood dealer. • Make sure that all wire connections are securely made by inserting jacks until they lock completely. • Do not let unconnected wires or terminals touch metal on the car or anything else conducting electricity.
Disc changer ⁄ • Connect the KCA-SR50 to the terminal labelled TO CHANGER 2. ¤ • Please keep the total extension of the control cable from the control unit to the disc changer to 13 m or less. Control cable lengths in excess of 13 m will cease to function properly.
Installation ¤ Installation using the velcro tapes • Install the unit in a well-ventilated location and do not place objects on top of it. • When installing to the car, the unit should be securely fastened at a location that will not interfere with driving. •...
✔ The changer switching unit "KCA-S220A" is not ESN (Electronic Serial Number) is not connected properly. registered in this unit. ☞ Connect the KCA-SR50 to the terminal labelled ➪ Consult your nearest service center. TO CHANGER 2. See the section on <Connecting Wires to Terminals>.
Specifications Specifications subject to change without notice. General Operating voltage (11 – 16V allowable) : 14.4 V Current consumption : 420 mA Installation Size (W x H x D) : 127 x 35 x 52 mm 5 x 1-3/8 x 2-1/16 inch Weight : 0.17 kg (0.37 lbs) English...