Hose And Cable Lengths; Water Connection; Water Supply - Siemens Family 1650 Operating And Installation Instructions

Hose and cable
lengths
Left-hand connection
Right-hand connection

Water connection

Water supply

40
For the water connection a standard cold-water
line with a minimum water pressure of 0,1 MPa
is required(with tap full ON, at least 8 litres of
water must flow out in one minute). If the water
pressure exceeds 1 MPa, a pressure reducing
valve must be added.
Never connect the machine to the mixer tap of
a pressureless hot-water heater.
Caution! Connections are under full water
pressure; check for leaks with tap turned fully
ON.
100cm
140cm
150cm
110cm