Control Panel - Siemens Family 1650 Operating And Installation Instructions

Control Panel

8
1. Programme selector
Can be turn in both directions to select/switch
off the washing programme. Stop/alter a
programme when it is in process, you should
turn the programme selector to
necessary, select a new programme. The
programme sequence is computer controlled.
Caution. The selector cannot be turned
mid-programme. It remains fixed in the
position selected.
2. Washing machine status indicator lights
The Ready/Wash control light flashes when
the required programme has been selected.
This control light remains lit when the Start
button is pressed and the programme begins.
,,
The Rinsing control light comes on(set)
during the rinse programme.
While the washing machine is spinning and
emptying out the water, the Spin/Door lock
control light remains lit. This indicator light
flashes when the programme is completed.
To turn the machine off, set the programme
selector to Stop .
3. Additional functions button:
Intensive stains: Extend the washing duration.
Extra rinsing: Additional rinsing cycle.
Anticrease: Reduces creasing.
,, ,,
4 . Start button
After the programme selected, press this button,
you can change the machine from waiting
status to active status. It is not Power/Stop
button and can not switch off the machine or
cancel a programme. You can cancel a pro-
gramme by turning the programme selector
,, ,,
to off , and cut the power of machine by
removing the plug from the socket.
,,
,,
,,
first. If
,,
,,