Safety Precautions And Warnings - Siemens Family 1650 Operating And Installation Instructions

Safety Precautions and Warnings

Before using for the
first time:
4
This machine complies with all relevant safety
regulations.
Please read the enclosed documents carefully
before using the washing machine for the first
time. They contain important information on
the installation, use and safety of the machine.
The manufacturer does not accept liability if
these instructions are not followed.
Please contact an authorized technician to
install the machine and instruct the using
method.
Please keep all documents in a safe place for
future reference.
Install the machine in accordance with the
instructions(page 36-45). Remove the transit
bolts and keep them in a safe place.
The washing machine must be installed and
operated in a room with the drain.
When heating, the maximum current of the
washing machine is 10A, so please make sure
that the power supply system(voltage; current
and the cable) is applicable to the load of the
applied appliance.
In order to ensure your safety, you must plug
the cable into a socket which connected to
earth. And please check your socket to make
sure that it is connected with reliable earth
correctly.
If the washing machine is visibly damaged,do
not connect it up. If you are in doubt,contact
your customer service representative or dealer.
This machine use thread connection water inlet
hose, connect it to the water tap together with
the machine. (carry out by an authorized tech-
nician)