When The Programme Has Ended - Siemens Family 1650 Operating And Installation Instructions

When the Programme
has ended
Unloading the
laundry
The Spin/Door lock control light flashes.
The buzzer sounds to remind the user.
Turn the programme selector to
where required:
Select a programme option( Pumping , Spin
,, ,,
or Rinsing ).
Press the Start button.
At the end of the programme option, turn the
programme selector to
Turn off the water tap.
Open the loading door.
If the loading door can not be opened:
Wait for 2 minutes(the safety function is active)
or
there is still water in the washing machine.
In the latter case, select the Pumping or
,, ,,
Spin programme.
Unload the laundry.
Caution:
Remove any debris (e.g. coins, paper clips )from
the drum and rubber seal-risk of rust formation!
Leave the loading door open to allow the
inside the washing machine to dry out.
,, ,,
,, ,,
Off .
,, ,,
Off , and
,, ,, ,, ,,
,, ,,
23