Table of Contents
Advertisement
11.2
Completing the pedestal installation:
Complete the installation by putting the table, the
wood basket and the grate on the pedestal, as
illustrated (Drawing 11). These parts are simply
placed with no particular fastening. Finish the
installation by slipping the ash drawer into its slot
on the pedestal.
Standard firescreen assembly
(9000, 9120)
Handle
Removable
Tempered
Glass Pane
DANGER of BREAKING GLASS : NEVER stuck the glass
firescreen under the hood as it will explode when the hood
expands under the heat. The glass firescreen must be put
outside the hood, never under.
DRAWING 12
12. Glass firescreen
12.1 Standard firescreen: Fireplaces 9000 and
9120 - Drawing 12
12.1.1
Assembling the tempered glass
firescreen:
The glass firescreen consists of 4
tempered glass panes of the same dimensions,
supplied with stabilizing steel brackets. Three of
the glass panes are stationary, the fourth is
removable and equipped with two handles to
allow easy loading of the wood.
12.1.2 Stabilizing bracket installation: Each
glass pane must be fitted with two stabilizing
brackets (8 stabilizing brackets are supplied with
the fireplace). Glue the stabilizing bracket on the
REV. 2014-10
glass with a silicon drop and slip it in place on the
glass pane.
mm) from the glass edge. Quickly clean any
excess silicone, then let dry.
12.1.3 Installation of the three stationary glass
panes: Once the silicone has dried, install, as
shown,
them at each upper corner with the special steel
comers supplied with the fireplace. Don't glue
the steel corners in place with silicone because,
Steel
from time to time, they need to be removed in
Corner
order to clean the glass.
12.1.4 Removable glass pane: Install a handle
at mid-level on each side of the fourth removable
glass pane. In order to protect the glass from
Stationary
Tempered
accidentally breaking, place the little metallic
Glass
strip on the glass before tightening the small
Panes
fastening screws.
12.2 Hinged firescreen: Fireplaces 9200, 9800,
9123 (Optional for 9000 and 9120)
Stabilizing
Foot
- Drawing 13:
12.2.1
structure:
9200, 9800, and 9123 fireplaces (optional for
9000 and 9120) are held in place with a steel
structure consisting of 4 tubular posts bolted in
place using the supplied bolts.
doors have a latch while the other glass panes are
either simply inserted in the provided channel
(9200) or assembled as opening doors but without
a latch in the case of the 9000, 9120, 9800 and
9123 (Drawing 13).
12.2.2
supplied with a number of small spacing washers.
These washers are used to lift the posts to a
height equivalent to the thickness of the ceramic
or stone finish of the fireplace table. The weight
of the posts shall never rest directly on ceramic or
stone, but on the steel spacing washers. For the
appearance, drill holes in the ceramic or stone
finish to conceal the washers.
Page 13
Install each bracket at about 3" (75
the three stationary glass panes. Join
Installation of the tubular steel
The hinged glass firescreens of the
Spacing washers: The steel posts are
The opening
- Quick Links:
- Part 1: Installation
Hide quick links:
Advertisement
Table of Contents
