Playing Back A Disc On Your Camcorder - Sony Handycam DCR-DVD92E Operating Manual

Playing back a disc on your camcorder

You cannot play back a disc.
Slide the POWER switch down repeatedly to light up
•
Check out the disc compatibility (p.13).
•
Insert a disc with the recording side facing your camcorder (p.24).
•
The disc recorded in other devices may not be played back on your camcorder.
•
The playback picture is distorted.
Clean the disc using the cleaning cloth (supplied, p.5).
•
" " is indicated on an image in the VISUAL INDEX screen.
Clean the disc using the cleaning cloth (supplied, p.5).
•
Loading of the data may have failed. It may be indicated correctly when you turn off the
•
power and then turn it on again, or remove the disc once and set it again.
No sound or only a low sound is heard when playing back a disc.
Set [MULTI-SOUND] to [STEREO] (p.65).
•
Turn up the volume (p.33).
•
Sound is not output when the LCD screen is closed. Open the LCD screen.
•
When you record sound with [MICREF LEVEL] (p.66) set to [LOW], the recorded sound
•
may be difficult to hear.
Playing back a disc on other players
You cannot play back the disc or a disc cannot be recognized.
Clean the disc using the cleaning cloth (supplied, p.5).
•
Finalize the disc (p.44).
•
A disc recorded in VR mode cannot be played back on a player that does not support VR
•
mode. Check the compatibility in the instruction manual of the playback device.
The playback picture is distorted.
Clean the disc using the cleaning cloth (supplied, p.5).
•
" " is indicated on an image in the DVD menu.
Loading of the data may have failed when the disc was finalized. For DVD-RW (VIDEO
•
mode)/DVD+RW, make the disc capable of additional recording (p.50), then remake the
DVD menu by finalizing the disc again. The DVD menu may be displayed correctly.
(Play/Edit).
93