Sony Handycam DCR-DVD92E Operating Manual page 89

A problem occurs when the camcorder is connected to the AC Adaptor.
Turn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it
•
again.
LCD screen/viewfinder
An unknown picture appears on the screen.
The camcorder is in [DEMO MODE] (p.64). Touch the LCD screen or insert a disc to cancel
•
[DEMO MODE].
An unknown indicator appears on the screen.
They may be warning indicators or messages (p.101).
•
The picture remains on the LCD screen.
This occurs if you disconnect the AC Adaptor from the wall socket or remove the battery
•
pack without turning off the power first. This is not a malfunction.
You cannot turn the LCD backlight off.
During Easy Handycam operation, you cannot turn the LCD backlight on/off using the
•
DISP/BATT INFO. Cancel Easy Handycam operation (p.27).
The buttons do not appear on the touch panel.
Touch the LCD screen lightly.
•
Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander:
•
Except for DCR-DVD92E/DVD602E) (p.22, 41).
The buttons on the touch panel do not work correctly or do not work at all.
Adjust the screen ([CALIBRATION]) (p.110).
•
If you change the aspect ratio of the picture, the aspect ratio of the buttons of the touch panel
•
and indicators will switch to the selected one (p.26, 60).
The picture in the viewfinder is not clear.
Extend the viewfinder (p.21).
•
Use the viewfinder lens adjustment lever to adjust the lens (p.21).
•
The picture in the viewfinder has disappeared.
The picture is not displayed in the viewfinder when the LCD screen is open. Close the LCD
•
screen (p.21).
89