Table of Contents
Advertisement
GB
Dear client,
Congratulations on your purchase of this FLOTEC product. Like all FLOTEC products, it has been developed with
the help of the latest technologies and manufactured with the most advanced electrical/electronic parts.
Take the time to read the instructions carefully before using this appliance.
Thank you!
Contents
Ch. 1
Features ..........................................................................................
Ch. 2
Limitations .......................................................................................
Ch. 3
Installation .......................................................................................
Ch. 4
Electrical Connections .....................................................................
Ch. 5
Starting The Unit ...............................................................................
Ch. 6
Adjustment Of The Pressure Switch .................................................
Ch. 7
Use of the pump with pre-cleaner .................................................
Ch. 8
Maintenance And Troubleshooting ...................................................
Appendix
Figures ............................................................................................
Warnings for the safety of individuals and objects.
Carefully follow the instructions marked with the following symbols.
DANGER
DANGER
Electric shock
risk
DANGER
WARNING
Ch. 1 Features
WARNING: Read this manual carefully before installing this pump.
This sign warns the operator that the failure to follow an instruction may damage the pump and/or the system.
Carefully store this manual. If problems arise, contact the Customer Assistance Service. Please verify that the pump has
been used correctly and that the cause of the problem is not imputable to its operation.
Every electropump is carefully tested and packed during its assembly.
On receiving the pump, check that the pump has not been damaged during transportation. If the pump is damaged,
immediately inform the dealer within 8 days from the date of purchase.
Ch. 2 Limitations
BOOSTER SETS FLOTEC are suitable for domestic use, to pump clean water at constant pressure; to supply
water for domestic use from wells and cisterns; to supply water for toilets, washing machines and dish washers
and to water gardens. They can also be used for pressurisation systems to increase hydrostatic pressure.
6
Keep the technical equipment out of the reach of children!
Warns that the failure to follow the directions given may cause electric
shock.
Warns that the failure to follow the directions given could cause serious
risk to individuals or objects.
This sign warns the operator that the failure to follow an instruction may
damage the pump and/or the system.
1
GB
1
GB
1
GB
2
GB
3
GB
3
GB
4
GB
4
GB
4
GB
91
pg.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Flotec WATERPRESS 1000
Summary of Contents for Flotec WATERPRESS 1000
- Page 1 Dear client, Congratulations on your purchase of this FLOTEC product. Like all FLOTEC products, it has been developed with the help of the latest technologies and manufactured with the most advanced electrical/electronic parts. Take the time to read the instructions carefully before using this appliance.
- Page 2 WARNING dangerous liquids. Verify that the electropump never runs without liquids. WARNING GARDENPRESS 50L Technical Data GARDENPRESS WATERPRESS 1000 Mains voltage / frequency 230 V ~ 50 Hz 230 V ~ 50 Hz Absorbed power 1100 Watt 800 Watt Type of protection / Insulation class...
- Page 3 Overload protection BOOSTER SETS FLOTEC have a built-in thermal protection switch. The pump stops if an overload condition occurs. The motor restarts automatically after it has cooled down (see point 3 of the Troubleshooting section for information on causes and corrective actions).
- Page 4 Ch. 6 Adjustment of the pressure switch The pressure switch of BOOSTER SETS FLOTEC is pre-set by the manufacturer at 2 bar for the start-up pressure and at 3 bar for the pressure required to stop the pump. According to the manufacturer's experience, these are the most suitable values for the vast majority of installations.
- Page 5 If the electropump is not going to be used for a long period of time (i.e. one year), it is advisable to empty it completely (by opening the drain cap, see Fig. 1 n. 10), rinse it with clean water and store it in a dry location, where it can be protected from frost.
Need help?
Do you have a question about the WATERPRESS 1000 and is the answer not in the manual?
Questions and answers