RULES FOR SAFE INSTALLATION AND GENERAL INFORMATION OPERATION The battery back-up sump system is not a substitute for your prima- ry sump pump. It is designed as a backup pump to pinch-hit for your Carefully read and follow all safety instructions in this manual primary sump pump during a power outage or other problem which or on system.
B. Normal high water level must never be high enough to start backup sump pump. Reducer Bushing (2 Supplied) C. Install a check valve (Flotec Stock No. 26-6) in the main sump pump discharge pipe between the pump and the back- Main Pump Discharge Pipe up mounting tee (see Figures 1 and 2).
cuit in main power panel “Backup sump pump power supply; do BATTERY MAINTENANCE not turn off”. NOTICE: To protect battery case from chipping and gouging, do 3. With charger properly connected and plugged in, the panel on not let battery sit on concrete floor. Install battery on a shelf or pro- the front of the charger will appear as in one of the following: tective pad (plywood, 2x4s, etc.).
MODELS FP2000DCC-02 AND 2P667B Black – Negative Battery Clamp – Sensor Brown Positive Battery Clamp White Positive Black w/ Black Red Tracer Sensor Negative 1412 1194 REPAIR PARTS LIST Key No. Part No. Part Description PS217-5E Switch Assembly # PS17-41 Pump Complete*** CC0030-13 Cord Clamp...
Page 6
Purchaser must pay all labor and shipping charges necessary to replace product covered by this warranty. This war- ranty shall not apply to acts of God, nor shall it apply to products which, in the sole judgement of FLOTEC, have been subject to negligence, abuse, accident, misapplication, tampering, alteration;...