Programming Via Direct Commands; Direct Commands Chart - Panasonic KX-TG2433BX Operating Instructions Manual

TG2433BX_2434BX(e).book Page 39 Thursday, March 31, 2005 10:57 AM

Programming via direct commands

You can also program most features using "direct commands"—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit's menus.
Details of each feature can be found on the corresponding pages.
1
Press {MENU}.
2
Enter the desired feature code (shown below).
3
Enter the desired setting code (shown below).
L This step may vary depending on the feature being programmed.
4
Press {Save}.
5
Press {OFF} to exit programming mode.

Direct commands chart

Feature
Ringer volume
Ringer tone
Interrupt tone
Message play
Date and time
Voice enhancer
Dial lock
LCD contrast
Key tone
Auto talk
Set dial mode
Set flash time
Set line mode
Ring count
Feature code Setting code
{1}: Low {2}: Medium
{1} {1}
{3}: High {0}: Off
{1}–{3}: Tone pattern 1–3
{1} {2}
{4}–{7}: Melody pattern 1–4
{1}: On {2}: 2 times {0}: Off
{1} {3}
{2}
Go to step 3 on page 16.
{4}
{1}: On {0}: Off
{5}
Go to step 3 on page 36.
{6}
{1}–{6}: Level 1–6
{0} {1}
{1}: On {0}: Off
{0} {2}
{1}: On {0}: Off
{0} {3}
{1}: Pulse {2}: Tone
{0} {5} {1}
{1}: 700 ms {2}: 600 ms
{0} {5} {2}
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
{1}: A {2}: B
{0} {5} {3}
{2}–{7}: 2–7 rings
{0} {6} {1}
{0}: Toll saver
Programmable Settings
Page
page 33
page 33
page 34
– page 44
page 16
page 34
page 36
page 35
page 37
page 34
page 35
page 35
page 36
page 47
39