Rigging The Fixture; Connection To The Mains; Dmx-512 Connection/Connection Between Fixtures - Elation VISION 575 User Manual

Hide thumbs Also See for VISION 575:

Table of Contents

4.3 Rigging the fixture

When installing the device, make sure there is no highly inflammable

material (decoration articles, etc.) in between a distance of min. 0,5 m.

The VISION 575 can be installed in any position without altering its operation characteristics

Install a safety wire that can hold at least 10 times the weight of the fixture. Never use the carrying handles for

secondary attachment.

Make sure that the device is fixed properly! Ensure that the structure

For fixing the projectors use the hole provided in the bracket. The hole in the adjustable mounting bracket has a

diameter of 10 mm.

For overhead use, fit a safety chain or cord.

Connect the fixture to the mains with the enclosed power-plug.

The earth has to be connected!

The occupation of the connection-cables is as follows:

The wires must not come into contact with each other, otherwise

the fixtures will not work at all, or will not work properly.

Danger of fire !

to which you are attaching the projectors is secure.

Cable

Brown

Live

Blue

Neutral

Yellow/Green

Earth

International

Table of Contents