Custom White Balance - Konica Minolta MAXXUM 5D Instruction Manual

CUSTOM WHITE BALANCE

Custom-white-balance function allows the camera to be
calibrated to a specific lighting condition. With the white
balance dial in the custom position, press the white-
balance button to open the setting screen.
Custom white balance
A guidance message appears. If the shutter-release
Use spot metering area.
button is pressed partway down, the monitor display
Press shutter to calibrate.
returns. The red custom set indicator is displayed in the
white-balance panel. Turn the white-balance dial to
another position to cancel the routine.
Fill the spot metering area with a white or neutral object;
the object does not need to be in focus. Press the
shutter-release button all the way down to calibrate the
camera.
Spot metering area
Custom white balance
An image of the reference target is displayed. Press the
central button of the controller to complete the
operation.
:OK
66
A
DVANCED RECORDING