Auto Power Save (Data-Transfer Mode) - Konica Minolta MAXXUM 5D Instruction Manual

Konica minota digital camera instruction manual 5d
Hide thumbs Also See for MAXXUM 5D:
Table of Contents

Advertisement

AUTO POWER SAVE (DATA-TRANSFER MODE)

If the camera does not receive a read or write command within ten minutes, it shuts down
to save power. When the camera shuts down, an unsafe-removal-of-device warning may
appear on the computer monitor. Click "OK." Neither the camera or computer will be
damaged in this operation.
Unplug the USB cable and turn off the camera. Remake the USB connection by
reattaching the cable and turning the camera on.
Konica Minolta History
On February 20th, 1962, John Glenn became the first American to orbit the Earth. On
board his Friendship 7 spacecraft was a Minolta Hi-matic camera to record that historic
event. The 4 hour, 55 minute, and 23 second flight orbited the Earth three times at an
average speed of 28,000 kph (17,500 mph).
Mr. Glenn visited our Sakai camera factory in Japan on May
24th, 1963 to plant a palm tree to celebrate the occasion.
The palm tree is still in the courtyard of the factory and
stands over eight meters tall (26ft).
The camera? It was not lost. It is on display at the
Smithsonian Institution's National Air and Space
Museum in Washington D.C. This and other
objects from John Glenn's Friendship 7 Mercury
flight can be found in galley 210, "Apollo to the
Moon."
119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynax 5d

Table of Contents