Changing A Fuse - PEUGEOT RCZ Handbook

CHANGING A FUSE

ACCESS TO THE TOOLS
The extraction tweezer is fi tted to the back of the dashboard fusebox
cover.
To gain access to them:
 turn the screw a quarter of a turn to the left,
 unclip the cover by pulling at the top right,
 remove the cover completely and turn it over,
 remove the carrier on which is fi tted the tweezer.
CHANGING A FUSE
Before changing a fuse, tit is necessary to:
 identify the cause and correct it,
 switch off all electrical consumers,
 immobilise the vehicle and switch off the ignition,
 identify the failed fuse using the allocation tables and drawings
presented on the following pages.
To replace a fuse, you must:
- use the special tweezer to extract the fuse from its housing and
check the condition of its fi lament,
- always replace a failed fuse with a fuse of the same rating (same
colour); a different rating fuse may cause malfunctions (risk of fi re).
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.
Good Failed
Tweezer