PEUGEOT RCZ Handbook page 186

Changing reversing lamp and foglamp bulbs
(1.6 litre THP 270 hp version)
The bulbs on these two types of lamp are changed by partly removing
the lamp unit A in the rear bumper:
 using a screwdriver, remove the 3 fi xing screws B located under the
vehicle,
 without forcing, lower the rear part of the lamp unit for access to the
bulb holders C ,
 turn the corresponding bulb holder a quarter of a turn then remove
it towards the front of the vehicle,
 turn the bulb one quarter of a turn and change it.
To refi t, carry out these operations in reverse order.
Take care not to touch the silencer; risk of burns, if you
change the bulb immediately after switching off the ignition.