Toner Save; Changing The Default Menu Settings; To Update The Default Copy Mode Setting - Konica Minolta PagePro 1380 MF User Manual

1
Place the original document face down on the flatbed glass and align its
center with the arrow mark on the glass.
2
Press N in 1 to select "Prints 2 original images reduced to fit onto one
sheet of paper".
3
Press Start. The LCD displays "Continue: START Finish :
4
*
Press "
prints the first document page. (If you do not press any key on the control
panel for about 30 seconds, the machine automatically prints the first
page.)

Toner Save

You can conserve toner using this function. When you turn on Toner Save,
print appears somewhat lighter. The default setting is off.
Each time you press Toner Save on the control panel to turn on the function,
the LED labeled "Toner Save" comes on.
If you press Toner Save on the control panel again to turn off the function, the
LED labeled "Toner Save" goes off.

Changing the default menu settings

The copy options—Density, Copy Mode, Zoom, Collate, Background
Remove, and Toner Save—can be set to the most frequently used ones.
When you copy a document, the default settings are used, unless they are
changed by using the corresponding buttons on the control panel.

To update the default Copy Mode setting

1
Press
2
Press a scroll button
the display.
3
Press
4
Press a scroll button until "21. Def Copy Mode" appears on the display.
5
Press Select.
66
"on the number keypad to quit the N in 1 function. The machine
.
.
until "2. Copy Setup" appears on
Setting copy options
*
"