Getting ready System Requirements ..............1-1 Installation Local install: Windows USB port..........2-1 2.1.1 For Windows 98 and Windows Me users ........2-3 Activating the optional second paper cassette ......2-5 2.1.2 For Windows 2000 professional users ........2-6 Activating the optional second paper cassette ......2-8 2.1.3 For Windows XP users ...............2-9 Activating the optional second paper cassette ......2-11...
Page 4
3.1.2 From the printer icon ..............3-1 Paper tab ..................3-2 3.2.1 Zoom ..................3-2 3.2.2 Copies ..................3-4 3.2.3 Paper Size ................. 3-4 To add a custom paper size............3-5 To delete a custom paper size........... 3-5 3.2.4 Paper Source ................3-6 3.2.5 Paper Type ................
Getting ready Getting ready System Requirements The following operating environment is required in order to use the printer driver. Item Requirements Operating System • Windows XP • Windows 2000 professional • Windows NT 4.0 workstation • Windows Me • Windows 98 •...
XP, you must be logged in as the Administrator. Note If you have previously installed the KONICA MINOLTA 130f driver, you will first have to uninstall it (see page 2-24.) Turn on your computer, but do not connect your machine to the USB port yet.
Page 8
Installation Select the driver you want to install, then click [Next]. Note Both PCL6 and PCL5e drivers cannot be installed simultaneously. If you want to install both drivers, first finish the installation of one driver and go to the other through “Add New Printer Wizard” (see “Installing both PCL5e and PCL6 driver”...
Installation 2.1.1 For Windows 98 and Windows Me users Note Make sure that you followed the installation step 1 to 9 described on page 2-1. Plug the USB cable to your machine and then connect it to your computer. Note Be sure to use a shielded USB cable.
Page 10
Repeat steps 3 through 5 three more times until the installation is completely finished. This completes the installation of the driver. The KONICA MINOLTA 130f printer and scanner drivers have been installed. If your machine has an optional second cassette installed, you must enter the driver and activate it.
If your machine has an optional second cassette installed, you must enter the driver and activate it. To activate the optional device: Click [Start] % [Settings] % [Printer]. Right click the “KONICA MINOLTA 130f PCL6 (or PCL5e)” icon, then click [Properties]. Click [Device Option] tab. Select [2nd paper cassette].
Installation 2.1.2 For Windows 2000 professional users Note Make sure that you followed the installation step 1 to 9 described on page 2-1. Plug the USB cable to your machine and then connect it to your computer. Note Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference.
Page 13
The “Add New Hardware Wizard” appears again. Repeat same procedures from step 3 to 8. This completes the installation of the driver. The KONICA MINOLTA 130f printer and scanner drivers have been installed. If your machine has an optional second cassette installed, you must enter the driver and activate it.
If your machine has an optional second cassette installed, you must enter the driver and activate it. To activate the optional device: Click [Start] % [Settings] % [Printer]. Right click the “KONICA MINOLTA 130f (or PCL5e)” icon, then click [Printing Preference]. Click [Device Option] tab. Select [2nd paper cassette].
Installation 2.1.3 For Windows XP users Note Make sure that you followed the installation step 1 to 9 described on page 2-1. Plug the USB cable to your machine and then connect it to your computer. Note Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference.
Page 16
Installation The “Found New Hardware Wizard” appears again. Repeat same procedures from step 3 to 7. The KONICA MINOLTA 130f printer and scanner drivers have been installed. If your machine has an optional second cassette installed, you must enter the driver and activate it. See “Activating the optional second paper cassette”...
If your machine has an optional second cassette installed, you must enter the driver and activate it. To activate the optional device: Click [Start] % [Settings] % [Printer]. Right click the “KONICA MINOLTA 130f (or PCL5e)” icon, then click [Printing Preference]. Click [Device Option] tab. Select [2nd paper cassette].
Installation 2.1.4 Installing both PCL5e and PCL6 driver If you want to install both drivers connecting with USB interface, first finish installation of one driver and go to the other through “Add New Printer Wizard”. For Windows XP user Click [Start] % [Printers and Faxes]. In Windows XP Home Edition, click [Start] % [Control Panel] % [Printers and other Hardware] % [Printers and Faxes].
Installation For Windows 2000 user Click [Start] % [Settings] % [Printers]. Double-click [Add Printer]. Click [Next]. Select “Local printer” and clear the check box for “Automatically detect and install my Plug and Play printer”, then click [Next]. Select [USB port] for printer and click [Next]. Click [Have Disk].
Installation For Windows 98/Me user Click [Start] % [Settings] % [Printers]. Double-click [Add Printer]. Click [Next]. Select “Local Printer” and click [Next]. Click [Have Disk]. Insert the supplied PCL printer driver CD into your CD-ROM drive, then click [Browse]. Browse to the following location on the CD depending on your choice, and then click [OK].
Installation Local install: Windows Parallel port (option) Note The optional parallel interface is required. Note ® ® A parallel interface available only for using Windows 95, Windows ® ® 98, Windows Me and Windows NT 4.0 workstation. ® ® If you are using Windows 2000 or Windows XP, please use an USB port or an optional network interface port.
Installation 2.2.2 Installing the driver Note If you have previously installed the KONICA MINOLTA 130f driver, you can update by simply clicking a [Update] button on the maintenance screen. Turn on your computer. Insert the supplied CD into your CD-ROM drive.
Installation Network install: TCP/IP (option) Note The optional network interface card is required. 2.3.1 Making connection Note ® Use an Ethernet cable with two twisted wire pairs and an RJ45 plug. Turn off the machine. Connect your Ethernet cable to the network port of your machine, and the other end of the cable to the network port.
4.0, you must be logged in as the Administrator. Note If you have previously installed the KONICA MINOLTA 130f driver, you can update by simply clicking a [Update] button on the maintenance screen. Insert the supplied CD into your CD-ROM drive.
If your machine has an optional second cassette installed, you must enter the driver and activate it. Click [Start] % [Settings] % [Printer]. Right click the “KONICA MINOLTA 130f printer” icon, then click [Properties] (Windows 98/Me), or [Printing Preference] (Windows 2000/XP).
Panel, Printers and other Hardware] % [Printers and Faxes]. In case of Windows 2000, click [Start] % [Settings] % [Printer]. Right click on the “KONICA MINOLTA 130f printer” icon and select [Properties] from pop-up menu. Click [Ports] tab and then click [Add Port].
2-23 to install. Then configure printer port according to the following procedures. Click [Start] % [Settings] % [Printer]. Right click on the “KONICA MINOLTA 130f printer” icon and select [Properties] from pop-up menu. Click [Ports] tab and then click [Add Port].
Installation Installing Microsoft TCP/IP Printing service in Windows NT 4.0 If Microsoft TCP/IP Printing service is not installed in your PC, you can install it by following procedures. Click [Start] % [Settings] % [Printer]. Double click [Network] icon. Click [Service tab] and then [Add]. Select [Microsoft TCP/IP Printing] and click [OK].
® For Windows 98 and Windows Select [Start], [Settings], [Control Panel], [Add/Remove Programs] and the [Install/Uninstall] tab. Select “KONICA MINOLTA 130f ” and click the [Add/Remove] button. Follow the instructions appears on your screen. ® For Windows 2000 Professional Select [Start], [Settings], [Control Panel] and [Add/Remove Programs] and [Change or Remove Programs] icon.
Windows XP Professional, click [Start] % [Printers and Faxes]. Windows XP Home edition, click [Start] % [Control Panel] % [Printers and other Hardware] % [Printers and Faxes]. Right-click the “KONICA MINOLTA 130f PCL6 (or PCL5e)” icon, and then click [Properties] (Windows 98/Me), [Printing Preferences] (Windows 2000/XP).
Configuring printer driver settings Paper tab Paper tab is used for setting paper destination and printing. 3.2.1 Zoom You can zoom (Enlarging and scaling-down) data in the following 2 methods. Note “Zoom” settings are not available whenever the “Combine” setting on the “Page Layout”...
Page 33
Configuring printer driver settings Scaling(%) You can enlarge or reduce the document in 1 percentage increments, from 25% to 400%. Note “Scaling (%)” is not available while the “Fit to paper” is selected. 130f PCL driver...
Configuring printer driver settings 3.2.2 Copies Specifies the number of copies for printing, ranging from 1 to 999. 3.2.3 Paper Size Select the paper size from the drop list, which shows the paper supported in the printer driver’s current setting. Paper sizes shown on the drop list are constrained by the “Paper Source”...
Configuring printer driver settings To add a custom paper size Click [Edit Custom]. Click [Add]. Enter the name that identify your custom paper. You can enter up to 20 characters. Specifies the width and length of your custom paper size. Click [OK].
Configuring printer driver settings 3.2.4 Paper Source Specifies paper cassette or bypass tray for printing. 3.2.5 Paper Type Select the paper type to be used for printing. If paper cassette is selected in the “Paper Source” box, the paper type setting cannot be changed. 3.2.6 Sort When you select “On”...
Configuring printer driver settings Page Layout tab The “Paper Layout” tab contains settings for “Combine” and “Watermark”. 3.3.1 Combine Configure how multiple pages of the document should be printed on a single sheet of paper. Select the number of document pages that should be printed on each sheet of paper.
Page 38
Configuring printer driver settings Print Separator Line Select this to print a border around each page when printing more than one document page on each sheet of paper. Detail of Combine Click this button to open the Detail of Combine dialogue in which you can specify the order of combined pages on the paper.
Configuring printer driver settings 3.3.2 Watermark You can print Watermark text (such as “Confidential” and “Sample”) over document. Choose the desirable watermark from the drop down list. First Page Only Select this check box when you want the watermark to be printed on the first page only.
Configuring printer driver settings To edit a watermark Select the applicable watermark name in the list. Then make any settings you want. To create a new watermark You can register up to 20 different watermarks in this dialog. (The 11 types of watermark have already been registered.) Click [Add].
Configuring printer driver settings Quality tab Use the settings on this tab to control the quality of the printed output. 3.4.1 Toner Saving Select toner saving to on to conserve the toner, but it will reduce print quality. 3.4.2 Resolution Select either “600 ×...
Configuring printer driver settings 3.4.3 True Type Mode Automatic When the font in the document is a printer-resident font, the printer uses it to printout. When the printer does not have the font, the font data will be transferred to the printer as outline data. Download as Outline All the font data in the document will be transferred to the printer as outline data.
Configuring printer driver settings Device Option tab Click options installed in this unit 3.5.1 Installed Options When the optional 2nd cassette is installed, click on the box to put a check mark so that the printer driver recognizes that an optional 2nd cassette has been installed.
The following is an example in using Microsoft Windows XP Professional. Operation could vary depending on your Windows version. Click [Start] % [Printers and Faxes]. Double click “KONICA MINOLTA 130f PCL6 (or PCL5e)”. The print queue is displayed. Right-click a document name for which printing should be canceled.
Troubleshooting Troubleshooting Error Messages The table below describes the main error messages that may appear during PC print mode operations. Error Message What it means What to do Memory Overflow Press The machine received data Press [Stop] to cancel the Stop more than it can fit in memory.
Specifications Specifications Printer Specifications Print speed 13 pages/min. (using A4 paper from 1st cassette) Print resolution 600 dpi/300 dpi (Default: 600dpi) Color/Mono Monochrome Share with the machine. Interface • USB 2.0 (full speed), except for Windows® 95 and ® Windows NT •...
Specifications Acceptable paper size Paper cassette Paper type Paper size Quantity A4, A5 š, F4 Plain paper 500 sheets (weight: 60–90 g/m²) (weight: 80 g/m²) Bypass Tray Paper type Paper size Quantity Plain paper A4, A5 š, A6, F4, Letter, Legal, 50 sheets (weight: 60–120 g/m²) Half-letter š, Executive...