Specifications - NEC LCD1501-BK Service Manual

Figure R.2
7. This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet
the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).

Specifications

4 SCREWS (M4)
(MAX depth: 8.5 mm
If use other
screw, check
depth of hole.
Replace screws
75 mm
)
Weight of LCD assembly: 2.8kg (MAX)
English-5
1-10
Figure R.3
Thickness of bracket (arm)
2.0 ~ 3.2 mm
Tighten all screws
75 mm