Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genie CCTV IS-100
Summary of Contents for Genie CCTV IS-100
- Page 1 Model : IS -100 Video Image Stabiliser Instruction Guide GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543 www.geniecctv.com Edition. GN - Feb 2010...
- Page 2 Introduction ■ The Video Stabiliser utilises advanced Digital Image Stabilising algorithms to minimise the effects of camera shake. These algorithms have been optimised to run in real-time on a dedicated digital media processor that fits inside a box that can rest on the palm of your hand. The video stabiliser has been designed to be totally plug-and-play, meaning you can get started simply by plugging in and switching on.
-
Page 3: Basic Settings
■ Configuration Names and Functions of Parts ■ Your stabiliser unit is shipped with the default options configured at the factory. ● STABILISATION Mode The default options are suitable for most applications, but some installations The stabilisation mode has two options: may warrant slightly different configuration. -
Page 4: Advanced Settings
■ Configuration Configuration ■ ㆍFixed : A fixed size black border is present on all sides which blanks out ADVANCED SETTINGS the moving edges of the image (see diagram). The size of the borders is equal to the maximum frame shift. See Advanced Configuration. ADVANCED SETTINGS ㆍNone : Old frames are not displayed. -
Page 5: Video Settings
■ Configuration Configuration ■ VIDEO SETTINGS ㆍLow Detail : When this option is enabled, the algorithm is disabled when a scene with insufficient detail for reliable stabilisation is VIDEO SETTINGS detected. This prevents the image position 'hunting' when there is very little scene detail or features. For example, when the camera VIDEO STANDARD NTSC is pointed at a completely blank wall the stabilised image will jump... -
Page 6: Troubleshooting
■ Troubleshooting Problem Solution Problem Solution The video output is not • This is quite normal - the unit remains in loop-through • Make sure the Maximum Frame Shift settings are stabilised for about mode while the internal Linux Operating System not set too small. - Page 7 ■ Specification MEMO ■ ITEM NTSC Stabilisation Tracking Rate Approx ±3000 pixels/sec. Stabilisation Range Variable up to ±256 pixels Stabilisation Frequency 0.1-30Hz (see graph) Video Delay < 80 ms. Stabilisation X-Y movement at sub-pixel accuracy. Automatic Algorithm Locks on to background features. Ignores moving objects and burnt-in text.
- Page 8 ■ MEMO...
Need help?
Do you have a question about the IS-100 and is the answer not in the manual?
Questions and answers