Genie CCTV HDVRQ Series User Manual page 18

- SPEED SETUP : Set the PTZ camera speed. ( 1 to 8)
NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the position
of the mouse. As the mouse pointer moves away from the center, speed becomes faster.
- PRESET SETUP :
Set the preset position. If the position setup is saved, PTZ camera will be directed to the set position by
preset number.
- PRESET TOUR :
6 different preset list can be created. If the created preset lists are set to "ON", recording is made with
preset tour.
- PATTERN SETUP :
Pattern can be created by movement, zoom, focus and iris. After pressing the BEGIN button, adjust the
PTZ camera position or zoom and then press the END button. All directions (up, down, left and right),
zoom and iris settings are recorded.
- PATTERN TOUR : PTZ camera moves according to the saved pattern.
- AUTO FOCUS / POWER / LIGHT :
Auto focus, power and light functions can be turned on/off on each category.
- OSD MENU : Turn on/off the OSD menu.
▪ ▪ ▪ ▪ ZOOM X2 : Zoom in x2.
ZOOM X4 : Zoom in x4.
▪ ▪ ▪ ▪
ADUIO ON : Turn on/off Audio.
▪ ▪ ▪ ▪
1 7