Genie CCTV HDVRQ Series User Manual page 34

AREA SETUP
▪
In the Area setup, the Red square is shown at the top left side of the screen. If select the OK button, the dot
color will be changed to Green. A motion area can be selected by the direction buttons.
NOTE : When the status is Red square, can move any direction to select.
When the status is Green color, can select motion area or cancel the set area.
After set the motion area, if select the MENU button, the following screen will be appeared.
SELECT ALL : Select all motion area.
▪
CLEAR ALL : Clear all motion area.
▪
SAVE : Save the changed setting.
▪
CLOSE : Close the pop-up screen.
▪
EXIT : Exit the motion area setup.
▪
3 3