Selecting The Paper Tray - Konica Minolta BIZHUP C451 User Manual

Setting up the PCL driver (Windows)
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Note
For custom sizes that are used often, it comes in handy if you add them
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to "Specifying the Settings tab settings" on page 5-48.
If using banner paper, specify the size of the banner paper in Custom
Size. For details, refer to "Printing on banner paper" on page 9-68.

Selecting the paper tray

You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
1
Click the Basic tab.
2
From the "Paper Tray" drop-down list, select the desired paper tray.
Note
If "Auto" is specified as the paper tray, you can select the paper type. If
the paper tray setting is changed to a setting other than "Auto", the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button. For details, refer to "Specifying
the paper type for a paper tray" on page 5-10.
C451
5
5-9