Table of Contents
Advertisement
Quick Links
IQAES00/01/10/11
IQAES00/01/10/11
Single/Dual Stream AES/EBU Distribution Amplifier
Table of Contents
Module Description ............................................. 2
Rear Panel Views ................................................. 2
Product Comparison ........................................... 4
Block Diagram...................................................... 5
Features................................................................ 5
Technical Profile .................................................. 6
INPUTS.................................................................. 7
AES Inputs................................................... 7
OUTPUTS.............................................................. 8
AES Outputs................................................ 8
25 Way D Type Connection Details ............ 9
CARD EDGE INDICATORS ................................ 11
RollCall PC Control Panel Screens.................. 12
Status ........................................................ 12
Logging...................................................... 13
ROLLCALL LOG FIELDS.......................... 13
RollTrack ................................................... 14
Setup ......................................................... 16
IQAES00OPS 27/07/06
Operation from an Active Control Panel ......... 17
MAIN MENU .............................................. 19
Status......................................................... 19
Logging ...................................................... 20
ROLLCALL LOG FIELDS .......................... 21
Setup......................................................... 25
Manual Revision Record ................................... 27
www.snellwilcox.com
Version 1 Issue 1
N33
C
C
N33.1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snell IQAES00
Summary of Contents for Snell IQAES00
-
Page 1: Table Of Contents
IQAES00/01/10/11 IQAES00/01/10/11 Single/Dual Stream AES/EBU Distribution Amplifier Table of Contents Module Description ..........2 Operation from an Active Control Panel ..17 MAIN MENU ..........19 Rear Panel Views ..........2 Status............19 Product Comparison ........... 4 Logging ............20 Block Diagram............ -
Page 2: Module Description
Module Description The IQAES00 digital audio distribution amplifier can receive digital audio from up to 500 m of RG59B cable for unbalanced inputs, or up to 150 m of AES approved cable for balanced inputs. The unit can be configured to provide up to 10 reclocked outputs for a single input or up to 5 outputs per input for 2 inputs. - Page 3 IQAES00/01/10/11 IQAES0001-1A AES IN 2 AES IN 1 AES OUT 1 AES OUT 2 IQAES0000-1 AES IN 1 AES OUT 1 AES OUT 2 AES IN 2 IQAES0014-1 AES AUDIO IN+OUT IQAES0010-1A AES IN + OUT AES IN + OUT...
-
Page 4: Product Comparison
IQAES00/01/10/11 Product Comparison Product AES Inputs AES Outputs Width/Style 1 Unbalanced (BNC) 6 Unbalanced (BNC) IQAES0001-1A Single A 2 Unbalanced (BNC) 3 Unbalanced Per Input (BNC) 1 Unbalanced (BNC) 10 Unbalanced (BNC) IQAES0003-2A Double A 2 Unbalanced (BNC) 5 Unbalanced Per Input (BNC) -
Page 5: Block Diagram
IQAES00/01/10/11 Block Diagram AES RX Equalization AES RX AES RX AES RX Equalization Built-in Intelligence Note: See rear panel information for full details of output combinations Network intelligence, control monitoring Features • Can receive digital audio from up to 150 m of... -
Page 6: Technical Profile
IQAES00/01/10/11 Technical Profile Signal Input Signal Outputs Digital Audio Input ....1/2 x AES/EBU Digital Audio ...... AES/EBU, up to 10 Standards (Balanced) ..AES3–1992 Note:........See rear panel details for output options Standards (Unbalanced) ..AES3–1992, SPDIF, SMPTE 276M Standards (Balanced) ..AES3–1992 Standards (Unbalanced) .. -
Page 7: Inputs
IQAES00/01/10/11 INPUTS AES OUT 1 AES OUT 2 AES Inputs AES IN 1 Unbalanced AES inputs are made to the unit via BNC connectors which terminate in 75 Ohms. AES IN 2 AES OUT 1 AES OUT 2 AES IN 1... -
Page 8: Outputs
IQAES00/01/10/11 OUTPUTS AES OUT 1 AES OUT 2 AES Outputs AES IN 1 All unbalanced AES outputs are available via BNC connectors for 75 Ohms. AES IN 2 AES OUT 1 AES OUT 2 AES IN 1 AES IN 2... -
Page 9: 25 Way D Type Connection Details
IQAES00/01/10/11 25 Way D Type Connection Details By Pin Number By Function Pin No Description Connection Pin No Description Connection Chassis Ground Ground Chassis Ground Ground Channel 1 + Not Used Channel 1 + Not Used Channel 2 + Not Used Channel 1 –... - Page 10 IQAES00/01/10/11 Example of Connection to XLR Connectors 25 Way Male D-Type Connections Connections Not Used Not Used AES Audio Output 5 AES Audio Output 4 AES Audio Output 3 AES Audio Output 2 AES Audio Output 1 AES Input Solder...
-
Page 11: Card Edge Indicators
IQAES00/01/10/11 CARD EDGE INDICATORS D1 D2 D3 Input OK Input Warning Power-Up/CPU Fault D1 OK (Green) This LED will illuminate if either input or input 1 (when in single channel mode) is present. D2 Warning (Yellow) This LED will illuminate if both inputs or input 1 (when in single channel mode) is missing. -
Page 12: Rollcall Pc Control Panel Screens
IQAES00/01/10/11 RollCall PC Control Panel Screens Status Input 1 and 2 This will display various information about the status of the inputs. Lock This indicates the lock status. It may show: Unlocked The unit is not locked to the input... -
Page 13: Logging
IQAES00/01/10/11 Logging Information about various parameters can be made available to a logging device that is attached to the RollCall™ network by checking the appropriate box. The status is shown to the right of the item. Any of the items may be selected from the list. -
Page 14: Rolltrack
IQAES00/01/10/11 RollTrack This function allows information to be sent, via the RollCall™ network, to other compatible units connected on the same network. For example, it can enable compatible audio delay units to produce an audio delay dependent on this and other similar units. The audio delay unit will dynamically follow or track the received delay-time information. - Page 15 The message is not being sent. Error This indicates a broken RollCall state. The message is being sent. This indicates a broken RollCall packet. Internal Inconsistent behavior; please contact Type Error your local Snell & Wilcox agent. IQAES00OPS 27/07/06 www.snellwilcox.com Version 1 Issue 1 N33.15...
-
Page 16: Setup
IQAES00/01/10/11 Setup Mode These modules can be configured to provide up to 10 reclocked outputs for a single input or up to 5 outputs per input for 2 inputs. 1 Input Information Window When checked all outputs will derive their input signal from Input 1. -
Page 17: Operation From An Active Control Panel
IQAES00/01/10/11 Operation from an Active Control Panel The card may be operated from an active control panel via the RollCall™ network. All operational parameters and selections are made using a system of menus displayed in two LCD windows. Operational details for the remote control panel can be found in the Modular System Operator's Manual. - Page 18 IQAES00/01/10/11 IQAES00 MENU Status Logging Status... Logging... RollTrack... Setup... Input 1 Control Input 2 Status Input 1, Input 2 Chroma_B/W Logging Status Locked INPUT_2_TYPE = RollTrack Sample Rate INPUT_2_IDENT = INPUT_2_AUDIO_CS_MO RollTrack Index ProSumer INPUT_2_AUDIO_TYPE RollTrack Source CRC Error INPUT_2_AUDIO_RATE...
-
Page 19: Main Menu
IQAES00/01/10/11 MENU DETAILS Status (see IQAES00 Menu System on previous pages) This will display various information about the MAIN MENU status of the inputs. The main or top level menu allows various sub- Status menus to be selected by pressing the button adjacent to the required text line. -
Page 20: Logging
IQAES00/01/10/11 Logging This will show the type of AES input signal. It may Information about various parameters can be show: made available to a logging device that is attached to the RollCall™ network by selecting the No Input No input signal detected appropriate item from the Control menu. -
Page 21: Rollcall Log Fields
IQAES00/01/10/11 ROLLCALL LOG FIELDS Log Field Log Value Description Type of signal the module processes INPUT_1_TYPE = AESIN1 Input rear label INPUT_1_IDENT = Number Display’s Channel Status information (Byte 1 bits 0-3) INPUT_1_AUDIO_CS_MO WARN:NoInput Non-PCM Detects what type of AES signal present... - Page 22 IQAES00/01/10/11 RollTrack RollTrack Source This function allows information to be sent, via the RollTrack Source RollCall™ network, to other compatible units connected on the same network. RollTrack Source For example, it can enable compatible audio delay Input 1 OK units to produce an audio delay dependent on this Preset and other similar units.
- Page 23 Internal Inconsistent behavior; please contact 99 represents an IQBAXR, 142 would represent an Type Error your local Snell & Wilcox agent. IQDAMDD, 255 a TBS100D etc. Inserting this number in the RollTrack address ensures that only the correct type of unit (in this example an IQBAXR) will respond to the RollTrack command;...
- Page 24 IQAES00/01/10/11 RollTrack Status This item will show the status of the currently selected RollTrack index. RollTrack Sending/Status RollTrack Sending/Status This may show: RollTrack message sent and received Unknown Rolltrack message has been sent but it has not yet completed. Timeout...
-
Page 25: Setup
IQAES00/01/10/11 Setup… Non PCM Detect This allows various functions to be setup. The non-PCM detector may be set to respond to the channel status bits as follows : Setup Non PCM Detect Mode Non PCM Detect Test nAUDIO Software Version... - Page 26 IQAES00/01/10/11 Preset Unit Information Window Selecting this item sets all adjustment functions This will display basic information about the status that include a preset facility, to their preset values. of the unit. Note that this is a momentary action. Restart...
-
Page 27: Manual Revision Record
IQAES00/01/10/11 Manual Revision Record Date Version No. Issue No. Change Comments 27-Jul-06 First issue released IQAES00OPS 27/07/06 www.snellwilcox.com Version 1 Issue 1 N33.27...
Need help?
Do you have a question about the IQAES00 and is the answer not in the manual?
Questions and answers