Related Manuals for Snell IQSDA31
Summary of Contents for Snell IQSDA31
- Page 1 User Instruction Manual IQSDA31 Dual Channel 3G/HD/SD-SDI Equalizing Distribution Amplifier IQSDA33 3G/HD/SD-SDI Fan-out Distribution Amplifier snellgroup.com...
-
Page 2: Information And Notices
Information in this manual and software are subject to change without notice and does not represent a commitment on the part of Snell Limited. The software described in this manual is furnished under a license agreement and can not be reproduced or copied in any manner without prior agreement with Snell Limited or their authorized agents. -
Page 3: Table Of Contents
1.1.1 IQSDA31 ........ -
Page 4: Introduction
1.1 Module Description 1.1.1 IQSDA31 The IQSDA31 provides dual inputs with 3 outputs per input for distribution of HD-SDI 3 Gbit/s & 1.5 Gbit/s or 270 Mbit/s SD-SDI signals in a single width package. Its class leading input equalization performance and non re-clocking distribution of wide-band signals makes it ideal for all distribution applications. -
Page 5: Order Codes
Modules with “A” order codes (for example, IQSDA3147-1A3) can be fitted into either A- or Note: B-style enclosures. Modules with “B” order codes (for example, IQSDA3147-1B3) can only be fitted into B-style enclosures. See page 7. 1.2.1 IQSDA31 IQSDA3147-1A3 Dual Channel 3G/HD/SD-SDI Equalizing Distribution Amplifier. IQSDA3147-1B3 2 inputs, 3 outputs per input. -
Page 6: Iqsda33
Introduction 1.3.2 IQSDA33 IQSDA3347-1A(B)3 IQSDA3361-1A(B)3 The input signal will bypass the module and be routed to the respective output in the event Note: of module removal or power failure. © Issue 2 Rev 4 Page 6 2015 Snell Limited... -
Page 7: Enclosures
1.4.1 B-style Enclosure Enclosure order codes: IQH3B-S-0, IQH3B-S-P 1.4.2 A-style Enclosures Enclosure order code: IQH1A-S-P Enclosure order codes: IQH3A-S-0, IQH3A-S-P Enclosure order codes: IQH3A-E-0, IQH3A-E-P, IQH3A-0-0, IQH3A-0-P Enclosure order code: IQH1A-S-P © Issue 2 Rev 4 Page 7 2015 Snell Limited... -
Page 8: Feature Summary
IQSDA31/IQSDA33 www.snellgroup.com Introduction 1.5 Feature Summary The IQSDA31 and IQSDA33 provide the following features. 1.5.1 IQSDA31 • Dual channel 3G-HD, HD-SDI, SD-SDI and wide-band distribution amplifier • Equalizes up to 80m at 3Gbit/s, 100 m at 1.5 Gbit/s and up to 250 m at 270 Mbit/s of Belden 1694A cable •... -
Page 9: Technical Specification
Specifications Electrical 1.5 Gbit/s HD-SDI, SMPTE 292M 270 Mbit/s SDI, SMPTE 259M-C Connector / Format BNC/ 75 Ohm panel jack on standard Snell connector panel Return Loss >-15 dB (270 Mbit/s, 1.5 Gbit/s) >-10 dB (3 Gbit/s) Power Consumption Module Power Consumption... -
Page 10: Iqsda33
Electrical 1.5 Gbit/s HD-SDI, SMPTE 292M 270 Mbit/s SDI, SMPTE 259M-C / DVB-ASI Connector / Format BNC/ 75 Ohm panel jack on standard Snell connector panel Return Loss >-15 dB (270 Mbit/s, 1.5 Gbit/s) >-10 dB (3 Gbit/s) Power Consumption... -
Page 11: Connections
IQSDA31/IQSDA33 www.snellgroup.com Connections 3. Connections This section describes the physical input and output connections provided by the IQSDA31 and IQSDA33. 3.1 IQSDA31 3.1.1 Inputs Serial digital input to the unit is made via 2 BNC connectors, which terminate in 75 Ohms. -
Page 12: Iqsda33
Serial digital output from the unit is made via 7 BNC connectors (6 on Relay Bypass version), which terminate in 75 Ohms. Outputs 1, 3, 5, and 7 are DVBASI compatible (1, 4, and 6 on Relay Bypass version). IQSDA3347-1A(B)3 IQSDA3361-1A(B)3 © Issue 2 Rev 4 Page 12 2015 Snell Limited... -
Page 13: Card Edge Leds
IQSDA31/IQSDA33 www.snellgroup.com Card Edge LEDs 4. Card Edge LEDs The LEDs on the edge of the module indicate its operating status. Channel 2 slew rate switch on IQSDA31 only. Note: Color Description Power OK Green This indicator is illuminated when a positive power supply is present.
Need help?
Do you have a question about the IQSDA31 and is the answer not in the manual?
Questions and answers