Copying Onto Manually Fed Paper By Manual Bypass - Konica Minolta BIZHUB 162 User Manual

Before making copies

Copying onto manually fed paper by manual bypass

1
Position the documents.
For details refer to "Loading the document" on page 4-10.
2
Adjust the paper guides to fit the size
of the paper.
3
Insert one sheet of paper with the
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
The manual bypass mark (
pears in the bottom line of the
screen.
?
Is a card or a postcard loaded?
% Make sure that it is not curled (rolled).
4
Press the [No/C] key.
The paper source setup menu appears.
5
Press the [*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
PLAIN
OHP
CARD
ENVELOPE
6
Press the [Yes] key.
The paper size menu appears.
bizhub 162/210
) ap-
3
3-35