Nikon One-Touch Zoom 90s One-Touch Zoom 90s AF Quartz Date Repair Manual page 54

Item
Automatic flash change
Speed light
accuracy
Color temperature
Red eye reduction
accuracy
Film advance Film scratch
Film damage
Space between pictures ·Within 0.5 ～
Picture size
Picture position
QD copy center position ·X=11.5mm
Time of each operation ·One frame advance: Within 1 second
Standard of judgment
W: Bv 5.625±1Ev
T: Bv 8.875±1Ev
·5800°K±300
Measure the temperature at point and line flash.
·Brightness should be approx. 10 LUX or more.
Measure the brightness at a position 30cm away
from the camera front finder cover in a dark
room.
·The photographed picture must not have harmful
scratch.
Take pictures with two films and observe the pic-
tures from beginning to end.
·Film must not
adversely the film advance and the photographed
picture.Check negative film for damage.
number
·The specified number of pictures must be taken.
Overlap of the last frame (out of the specified
number) is allowable.
Check the space between pictures with the nega-
tive film which has been used to the last frame
at 36EX.
Take pictures by 18 shots at T/W in the forced
infinity mode.
・24 mm×36
+0.8 –0.3
Check the picture size with negative film.
Take pictures at W/T in the forced infinity
mode.
·Up and down direction: 0.2mm or more between
the picture and perforation There must be no
extreme inclination.Check the picture position
with the negative film which has been used in
T/W photography.After one frame of picture has
been photographed, add vibration of reliabil-
ity, take a picture again and check its posi-
tion.
When all the digits are copied, the bottom of
characters must be 2.7±0.5 from the outline of
the negative film and their right side must be
4.5±0.5.
Check the position with the negative film which
has been used at W end and M/T from the front of
lens barrel.
Measure the time after release.
·36EX rewinding: Within 40 seconds
Start measurement the moment the last frame is
released.
- R4 • One Touch Zoom 90s AF -
have damage which
3.5mm in the specified picture
mm
+0.8 –0.3
Y=-9mm
FCA54001-R.3567.A
Method and tools
AE tester
Minolta color
Ⅲ F
Meter
Minolta digital
illuminometer T-1
Fuji Neopan SS
Power supply(1)
affects
Fuji Neopan SS
Power supply(1)
Fuji Neopan SS
Power supply(1)
And (3)
Visual check
Fuji Neopan SS
Vernier calipers
Fuji Neopan SS
Power supply(1)
And (3)
Fuji Neopan SS
Inspection jig
tool
Fuji ISO100
Power supply(1)
Stop watch
and