DISASSENBLING /ASSEMBLING/ADJUSTMENT
● Due to its internal high voltage area, make sure to check the safety when
removing the cover.
● Be sure to discharge the static electricity from the main condenser
according to the instruction in the repair manual after removing the
cover.
Note:
① Be sure to take off the battery before disassembly.
② At disassembly, make sure to memorize how to arrange the wires, how to fix the screws,
and the types of used screws.
③ Be sure to get yourself grounded because of the static electricity which exerts any serious
adverse effect to ICs.
④ Make sure which side is back or forth when taking off the gear.
1.
DISASSEMBLING
● Remove the battery.
Removal of side cover
● Remove the three screws 1.
● As pushing the upper center of the side cover 2, remove it forward.
②
WARNING
- D1 • One Touch Zoom 90s AF -
FCA54001-R.3567.A
There is a latch on the upper side.
①
×3