Listen To Radio; Switch To Radio Mode; Set Up; Tune To A Radio Station - Philips CED781 User Manual

6 Listen to radio

Switch to radio mode

After the boot-up at the first time, the system
switches to radio mode automatically.
To switch the source back to radio afterwards,
[Radio] on the home menu.
tap
» The interface for radio is displayed.

Set up

Before you search for radio stations, make prior
setup.
Tap to display the setup menus.
Select a radio range
1
Tap [Radio Range].
22 EN
2
Tap [Distance] or [Local] to select a tuner
sensitivity.
• [Distance]: Stations with strong and
weak signals can be tuned to.
[Local]: Only stations with strong
•
signals can be tuned to.
Enable the RDS feature
Note
•
RDS feature is enabled by default.
•
Only after the RDS feature is enabled, the options of
[PTY list] and [RDS Clock] are displayed.
Tap to select [RDS ON].
» The option of [PTY list]is displayed.
• To disable the RDS feature, tap to
select [RDS OFF].

Tune to a radio station

1
Tap FM or AM to select a band.
FM bands: FM1, FM2, FM3
•
AM bands: AM1, AM2
•
2
Tap or repeatedly until the frequency
of target radio station is displayed.
• To tune to a radio station automatically,
tap and hold
frequency digits start change.
Tip
•
You can also press BAND on the remote control
repeatedly to select a band.
or until the