Attach The Front Panel - Philips CED781 User Manual

3
When installing in a shallow space, change
the position of slide brackets.
4
Place the supplied rubber cushion over the
end of the mounting bolt.
5
Install the sleeve into the dashboard and
bend the tabs outwards to fix the sleeve.
Slide the unit into the dashboard until you
hear a click.
Note
•
If the unit is fixed by the supplied screws instead of the
sleeve, skip this step.
14 EN

Attach the front panel

1
Attach the trim plate.
2
Insert the left side of the panel in the
chassis until it is correctly engaged.
3
Press the right side of the panel until the
mechanism locks it into place.
Detach the front panel
Note
•
Before you insert an SD/SDHC card or reset the
system, detach the front panel.
1
Press to release the front panel.
2
Pull the front panel outwards to remove it.