Download  Print this page

Set The Rear View Camera; Reset The System; Replace The Fuse; Upgrade The Firmware - Philips CED781 User Manual

Car entertainment system.
Hide thumbs

Advertisement

Set the rear view camera

If a rear view camera is connected, you can
view on the screen what the camera takes.
1
Tap
>
to access the full menu with all
feature icons displayed.
2
Tap
(the icon is displayed only when a
compatible camera is correctly connected).
" Picture from rear camera is displayed.

Reset the system

If the system hangs up, reset it.
1
Detach the front panel.
2
Press RESET with the tip of a ball-point
pen or toothpick.

Replace the fuse

If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A).
4
Replace the fuse.
Tip
If the fuse breaks immediately after it is replaced, there
may be an internal malfunction. In this case, consult
your retailer.

Upgrade the firmware

Note
Power supply must not be interrupted during the
upgrade.
When the firmware upgrade succeeds, all settings are
restored to the factory default status.
FUSE (15A)
EN
41

Advertisement

Table of Contents

   Related Manuals for Philips CED781

Comments to this Manuals

Symbols: 0
Latest comments: