Maintenance; Pre-Filter - Mitsubishi Electric MJ-E16VX-S1 Instruction Manual

Hide thumbs Also See for MJ-E16VX-S1:
Table of Contents

Advertisement

Maintenance

Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters,
gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in
leakage.
Cleaning
Water tank · Main unit
Wipe with a soft cloth.
Floating element
Do not remove or dismantle.
¡ The unit draws in dust present in the air, and this
may cause the tank to gradually become dirty.
If the dirt does not come off easily, wash with
cold or warm water, then wipe with a soft, dry
cloth.
¡ Mildew may form in the tank unless kept clean.
Once every two weeks

Pre-filter

Debris clogging the pre-filter reduces the
effectiveness of the dehumidifier. Clean once every
2 weeks.
For maintenance procedures see
1
Remove the front panel and pre-
filter.
2
Remove the photocatalytic filter.
3
Clean the pre-filter.
Replacing the supplement
cartridge
4
Fit the photocatalytic filter.
5
Attach the pre-filter and front
panel.
10
Remove grit
with vacuum
cleaner.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents