Table of Contents
Advertisement
Quick Reference Guide
Beeper Definitions
The scanner issues different beep sequences and patterns to indicate
status. The table below defines beep sequences that occur during both
normal scanning and while programming the scanner.
Beeper Sequence
Standard Use
Low/medium/high beep
Short high beep
4 long low beeps
5 low beeps
Low/high/low beep
High/high/high/low beep
Parameter Menu Scanning
Short high beep
Low/high beep
High/low beep
High/low/high/low beep
Low/high/low/high beep
Code 39 Buffering
High/low beep
3 Beeps - long high beep
Power up.
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error was detected in a scanned
symbol. The data is ignored. This occurs if a unit is not
properly configured. Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned,
wrong entry, incorrect bar code programming
sequence; remain in program mode.
Keyboard parameter selected. Enter value using bar
code keypad.
Successful program exit with change in the parameter
setting.
Out of host parameter storage space. Scan
Defaults on page 8
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
Indication
.
5
Set
Advertisement
Table of Contents
