Advertisement
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested. Ensure that all accessories are removed
from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
damaged or defective please contact your distributor or Cabletronix at 1-610-429-1511 for
assistance.
3. PRODUCT DIAGRAM
4. HARDWARE CONNECTIONS
a. Connect the signal source's component video (Y, Pb, Pr) output to the distribution
amplifier's component video (Y, Pb, Pr) input. Or, connect the signal source's
composite video output to the distribution amplifier's composite video input.
b. Connect the signal source's audio L/R output to the distribution amplifier's audio L/R
input.
c. Connect your TV or monitor's component video (Y, Pb, Pr) input to the distribution
amplifier's component video (Y, Pb, Pr) OUTPUT 1, OUTPUT 2, OUTPUT 3, or
OUTPUT 4. Or, connect your TV or monitor's composite video input to the distribution
amplifier's composite video OUTPUT 1, OUTPUT 2, OUTPUT 3 or OUTPUT 4.
d. Connect your TV or monitor's audio L/R input to the distribution amplifier's audio L/R
output.
Troubleshooting assistance can be found on-line at
from Cabletronix sales engineers at 1-610-429-1511.
INSTALLATION
INSERT IMAGE and CONNECTIONS HERE
3
If equipment appears to be
www.cabletronix.com
in addition to support
Advertisement
