The unit is capable of 135-channel operation from 54MHz to 1000 MHz. The CTA-30RK-1000 may be used in conjunction with headend combiners such as the Cabletronix CTHC-12G (12-port) and CTHC-24G (24-port). Key features include: adjustable slope control, adjustable gain control, output test port, and double shielded RFI enclosures.
INSTALLATION AND OPERATION NOTE TO SYSTEM INSTALLER System installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 1.
CTA-30RK-1000 and other equipment are being powered by it. 5. ADJUSTMENT The chart below shows the proper operation levels for the CTA-30RK-1000. Note the listed performance criteria are for specific numbers of channels, and must be de-rated accordingly when inserting additional channels. However, the amplifier’s available power does not change.
F-connectors. b. Ensure the F-connector’s center conductor is making solid contact with the CTA-30RK-1000’s In and Out ports, and the appropriate headend combiner and RF distribution network connectors. c. When taking measurements it is always best to use a quality signal level meter.