Related Manuals for CableTronix CT-700
Summary of Contents for CableTronix CT-700
- Page 1 INSTALLATION MANUAL CT-700 One In/Seven Out Composite Video/Audio Distribution Amplifier...
-
Page 2: Package Contents
One CT-700 Distribution Amplifier One CT-700 Power Supply One CT-700 Installation Manual PRODUCT DESCRIPTION The CT-700 allows any audio./video source to distribute composite video with left and right audio to up to seven different locations without any signal loss. SPECIFICATIONS CT-700... -
Page 3: Unpacking And Handling
INSTALLATION AND OPERATION NOTE TO SYSTEM INSTALLER System installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 1. -
Page 4: Hardware Connections
Multiple CT-700 units can be looped, cascaded or installed in tandem as shown below without audio/video signal loss. 4. HARDWARE CONNECTIONS a. Connect the signal source’s composite video output to the distribution amplifier’s composite video output. b. Connect the signal source’s audio L/R output to the distribution amplifier’s audio L/R input. -
Page 5: Troubleshooting
“c” above. 5. TROUBLESHOOTING a. Ensure you are using quality audio/video cables with RCA connectors. b. Maximum cable distance between TV/monitor and the CT-700 is 150 feet. c. Maximum cable distance between two daisy-chained or cascaded CT-700s is 100 feet.