Advertisement
Quick Links
Advertisement
Related Manuals for CableTronix CTA-30-870AR
Summary of Contents for CableTronix CTA-30-870AR
- Page 1 INSTALLATION MANUAL CTA-30-870AR 2-Way Wall Mount Distribution Amplifier...
-
Page 2: Package Contents
One CTA-30-870AR Installation Manual PRODUCT DESCRIPTION The CTA-30-870AR distribution amplifier is a high quality push-pull amplifier producing signals with extremely low distortion and harmonic content. The forward bandwidth makes possible 135-channel operation while the two-way configuration allows the amplifier to be used in systems that utilize remote signal sources on the return path. -
Page 3: Unpacking And Handling
INSTALLATION AND OPERATION NOTE TO SYSTEM INSTALLER System installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 1. -
Page 4: Hardware Connections
Plug from wall power adaptor supplies 24VDC 4. HARDWARE CONNECTIONS a. Mount the CTA-30-870AR securely onto a wall or equipment rack using screws or bolts through the mounting tabs. b. Connect a 75ohm coaxial cable with F-connectors from the RF source output to CTA-30-870AR’s Input port. -
Page 5: Troubleshooting
F-connectors. b. Ensure the F-connector’s center conductor is making solid contact with the CTA-30-870AR’s Input and Output ports, and the appropriate RF source and RF distribution network connectors. c. When taking measurements it is always best to use an RF spectrum analyzer or quality signal level meter.